Air Temperature Actuator Replacement

Air Temperature Actuator Replacement

Removal Procedure

1. Disconnect the air temperature actuator electrical connector.





2. Remove the air temperature actuator retaining screws.
3. Remove the air temperature actuator (1) from the heater assembly (2).

Installation Procedure





1. Install the air temperature actuator (1) to the heater assembly (2).

Notice: Refer to Fastener Notice.

2. Install the air temperature actuator retaining screws.

Tighten the screws to 1.9 N.m (17 lb in).

3. Connect the air temperature actuator electrical connector.