Coolant Recovery Reservoir Replacement

Coolant Recovery Reservoir Replacement

Removal Procedure

1. Partially drain the coolant.
2. Disconnect the hose from the coolant recovery reservoir.
3. Remove the coolant recovery reservoir retaining screws.
4. Remove the coolant recovery reservoir.

Installation Procedure

1. Install the coolant recovery reservoir.

Notice: Refer to Fastener Notice.

2. Install the coolant recovery reservoir retaining screws.

Tighten the screws to 6 N.m (53 lb in).

3. Connect the hose to the coolant recovery reservoir.
4. Add coolant to reservoir.