Fuel Feed Pipe Replacement

FUEL FEED PIPE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the water outlet tube.
2. Disconnect the fuel feed line quick connect fitting.
3. Remove the oil level indicator tube bolt.
4. Remove the oil level indicator tube bracket bolts and bracket.




5. Reposition the exhaust gas recirculation (EGR) coolant pipe hose clamp.
6. Remove the EGR coolant pipe hose.
7. Remove the EGR coolant pipe bolts.
8. Remove the EGR coolant pipe.




9. Remove the fuel feed pipe nut and clip bolts.
10. Remove the fuel feed pipe.

INSTALLATION PROCEDURE




1. Install the fuel feed pipe.

NOTE: Refer to Fastener Notice.

2. Install the fuel feed pipe nut and clip bolts.

Tighten the bolts/nut to 41 N.m (30 lb ft).




3. Install the EGR coolant pipe.
4. Install the EGR coolant pipe bolts.

Tighten the bolts to 25 N.m (18 lb ft).

5. Install the EGR coolant pipe hose.
6. Position the EGR coolant pipe hose clamp.




7. Install the oil level indicator tube bracket and bolts.

Tighten the bolts to 21 N.m (15 lb ft).

8. Install the oil level indicator tube bolt.

Tighten the bolt to 21 N.m (15 lb ft).

9. Connect the fuel feed line quick connect fitting.
10. Install the water outlet tube.
11. Prime the fuel system. Refer to Fuel System Priming.
12. Start the engine. If the engine stalls, repeat the above step.
13. Once the engine starts, inspect for fuel leaks.