Engine to Transaxle Brace Replacement

Engine to Transaxle Brace Replacement

Removal Procedure
1. Raise and support the vehicle.





2. Remove the transaxle brace to engine oil pan bolts (2).
3. Remove the transaxle brace to transaxle bolt (1).
4. Remove the transaxle brace (3).

Installation Procedure





Notice: Refer to Fastener Notice in Service Precautions.

1. Install the transaxle brace (3).
2. Install the transaxle brace bolts (1, 2).
^ Tighten the bolts to 50 Nm (37 lb ft).
3. Lower the vehicle.