Window Run Channel Replacement - Front Door

Window Run Channel Replacement - Front Door

Removal Procedure

1. Remove the front door window. Refer to Window Replacement - Front Door (Service and Repair) .
2. Remove the front door window weatherstrip run channel assembly. Refer to Window Weatherstrip Run Channel Assembly Replacement - Front (Window Weatherstrip Run Channel Assembly Replacement - Front) .
3. Remove the outside rearview mirror. Refer to Mirror Replacement (Doors) .
4. Remove the front door frame applique. Refer to Door Frame Applique Replacement - Front () .




5. Remove the window run channel bolts.
6. Remove the front door window run channel. Starting from the rear corner of the door, remove the seal from the door header flange.



Installation Procedure






Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the window run channel seal to the door header flange, starting from the rear corner.

Tighten the bolts to 8 N.m (71 lb in).

2. Install the front door window weatherstrip run channel assembly. Refer to Window Weatherstrip Run Channel Assembly Replacement - Front (Window Weatherstrip Run Channel Assembly Replacement - Front) .
3. Install the front door frame applique. Refer to Door Frame Applique Replacement - Front () .
4. Install the outside rearview mirror. Refer to Mirror Replacement (Doors) .
5. Install the front door window. Refer to Window Replacement - Front Door (Service and Repair) .