Instrument Panel - Center

AIR OUTLET REPLACEMENT - INSTRUMENT PANEL - CENTER

REMOVAL PROCEDURE
1. Remove the left closeout/insulator panel.
2. Remove the knee bolster trim panel.
3. Remove the instrument panel (I/P) cluster bezel, Chevrolet only.
4. Remove the radio.




5. Remove the 2 screws (1) from the bottom of the air outlet assembly.




6. Remove the air deflectors from the outlet.
7. Grasp and pull the outlet rearward from the I/P.




8. Remove the outlet from the vehicle.

INSTALLATION PROCEDURE




1. If reinstalling the original outlet, install the air deflectors in the outlet. Refer to Air Outlet Replacement - Instrument Panel.
2. Install the outlet assembly to the I/P.




3. Install the 2 retaining screws (1).

Tighten the screws to 2.5 N.m (22 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.

4. Install the radio.
5. Install the I/P cluster bezel, Chevrolet only.
6. Install the knee bolster trim panel.
7. Install the left closeout/insulator panel.