Rear Axle Lower Control Arm Replacement

Rear Axle Lower Control Arm Replacement

Removal Procedure





1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Raise and support the rear axle at the designed D - height. Refer to Trim Height Specifications.
3. If equipped with air suspension, depressurize the air suspension system. Refer to Air Suspension Depressurization Procedure.
4. Remove the rear axle lower control arm to the axle mounting nut and bolt.





5. Remove the rear axle lower control arm to the frame mounting nut and bolt.
6. Remove the lower control arm.

Installation Procedure





1. Install the lower control arm.
2. Install the rear axle lower control arm to the frame mounting nut and bolt.





3. Install the rear axle lower control arm to the axle mounting bolt and nut.

Tighten
Tighten the lower control arm mounting bolts to 100 Nm (74 ft. lbs.).

Notice: Refer to Fastener Notice in Service Precautions.

4. Remove the rear axle support.
5. Lower the vehicle.