Transmission Mount: Service and Repair

Transmission Mount Replacement - Rear

Removal Procedure





1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Support the transmission with a transmission jack.
3. Remove the transmission mount to the transmission support retaining nut or nuts.





4. Raise the transmission to take the weight off of the mount.
5. Remove the transmission mount to the transmission or transfer case adapter mounting bolts (1).
6. Raise the transmission just enough to remove the transmission mount.
7. Remove the transmission mount from the vehicle.

Installation Procedure





1. Install the transmission mount to the vehicle.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the transmission mount to the transmission or transfer case adapter mounting bolts (1).
^ For RWD vehicles, tighten the bolts to 61 Nm (45 lb ft).
^ For AWD vehicles, tighten the bolts to 85 Nm (63 lb ft).





3. Lower the transmission.
4. Install the transmission mount to the transmission support retaining nut or nuts.
^ Tighten the nut or nuts to 45 Nm (33 lb ft).
5. Remove the transmission jack.
6. Lower the vehicle.