Compressor Pressure Relief Valve Installation
COMPRESSOR PRESSURE RELIEF VALVE INSTALLTOOLS REQUIRED
J 43600 ACR 2000 Air Conditioning Service Center
1. Clean the valve seat area on the rear head.
2. Lubricate the O-ring of the new pressure relief valve (5) and the O-ring assembly using new 525 viscosity refrigerant oil.
3. Install the new pressure relief valve (5).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the new valve to 9.0 N.m (6.1 lb ft).
4. Evacuate and recharge the system using the J 39500-B.
5. Leak test the system.