Removal and Replacement

Driver Information Center Module Replacement

Removal Procedure





1. Remove the overhead console (3). Refer to Roof Console Replacement.
2. Remove the display lens and the switch plate (1).
3. Disconnect the electrical connectors.
4. Remove the temperature/compass electronic display module (2).



Installation Procedure





1. Install the temperature/compass electronic display module (2).
2. Connect the electrical connectors.
3. Install the display lens and the switch plate (1).
4. Install the overhead console (3). Refer to Roof Console Replacement.
5. Recalibrate the compass. Refer to Electronic Compass Calibration.