Air Outlet Replacement - Instrument Panel

AIR OUTLET REPLACEMENT - INSTRUMENT PANEL

REMOVAL PROCEDURE
1. Remove the right side knee bolster.




2. Remove the screw that retains the air outlet vent to the I/P.




3. Lift upward on the I/P assist handle.
4. Remove the air outlet vent from the I/P.

INSTALLATION PROCEDURE




1. Lift upward on the I/P assist handle.




2. Install the air outlet vent to the I/P.
3. Install the screw that retains the air outlet vent to the I/P.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the screw to 2 N.m (18 lb in).

4. Install the right side knee bolster.