Oil Pump Drive Shaft: Service and Repair

Oil Pump Drive Replacement

Removal Procedure





1. Remove the intake manifold.
2. Remove the oil pump drive bolt.
3. Use a lifting and turning motion to remove the oil pump drive.
4. Inspect the oil pump drive shaft for excessive wear or damage.

Installation Procedure

Important: Do not crack the oil pump drive shaft retainer.





1. Install the oil pump drive by twisting the oil pump drive into place.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the oil pump drive bolt.
^ Tighten the bolt to 25 Nm (18 ft. lbs.).
3. Install the intake manifold.