Rear

Park Brake Cable Replacement- Rear

Removal Procedure





1. Raise the vehicle. Refer to Vehicle Lifting.
2. Loosen the equalizer.
3. Remove the rear cable from the equalizer.
4. Remove the brake drum and the shoe assembly.
5. Depress the cable-retaining fingers and remove the cable from the backing plate.
6. Remove the rear cable from the vehicle.

Installation Procedure





1. Install the rear cable into the backing plate. Ensure all retaining fingers are completely through the backing plate.
2. Install the brake shoes and the drum assembly.
3. Install the park brake cable to the equalizer.
4. Adjust the park brake.
5. Lower the vehicle.