Front

Park Brake Cable Replacement- Front

Removal Procedure





1. Raise the vehicle. Refer to Vehicle Lifting.
2. Loosen the park brake cable at the equalizer.
3. Remove the front park brake cable from the park brake cable connector.
4. Lower the vehicle.





5. Remove the front cable (1) from the lever assembly (2).
6. Remove the cowl side panel trim.
7. Remove the lever assembly.





8. Remove the step trim plate. Lift the rocker panel trim and peel back the carpet to expose the park brake cable grommet (4).
9. Remove the front cable (3). Unclip the cable and pull through the body.

Installation Procedure





1. Install the front cable.
^ Secure the grommet (4) to the body.
^ Clip the cable at the kick panel.





2. Connect the cable (1) to the lever assembly (2).
3. Install the lever assembly.
4. Install the cowl side panel.
5. Install the step trim plate.
6. Connect the front cable to the lever assembly.





7. Raise the vehicle. Refer to Vehicle Lifting.
8. Connect the front cable to the park brake cable connector.
9. Adjust the park brake.
10. Lower the vehicle.