Disc Brake Splash Shield Replacement- Front

Disc Brake Splash Shield Replacement- Front

Removal Procedure





1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the brake rotor.
4. Remove the two wheel hub and bearing mounting bolts that secure the splash shield to the spindle.
5. Remove the splash shield.

Installation Procedure





1. Install the splash shield.

Notice: Refer to fastener Notice in Service Precautions.

2. Install the two wheel hub and bearing mounting bolts that secure the splash shield to the spindle.
^ Tighten the wheel hub and bearing mounting bolts to 90 Nm (66 ft. lbs.).
3. Install the brake rotor.
4. Install the tire and wheel.
5. Lower the vehicle.