Rear

Brake Hose Replacement - Rear
Removal Procedure
1. Siphon brake fluid from the master cylinder reservoir.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Clean any dirt and foreign material from the hose and the fittings.
4. Remove the rear brake hose from the right rear brake pipe.
5. Remove the rear brake hose from the center brake pipe.

Installation Procedure
1. Install the rear brake hose to the center brake pipe.
2. Install the rear brake hose to the right rear brake pipe.
3. Bleed the brake system. Refer to Hydraulic Brake System Bleeding.
4. Lower the vehicle.