Hose Replacement - Rear Window - Washer Nozzle (Liftgate)

REMOVAL PROCEDURE




1. Remove the liftgate trim panel.
2. Disconnect the hose from the liftgate harness.
3. Disconnect the hose from the liftgate inner panel.
4. Remove the 2 clips that secure the hose to the liftgate.

INSTALLATION PROCEDURE




1. Apply lubricant to both ends of the hose.
2. Install the hose to the liftgate inner panel using 2 hose clips.
3. Connect the hose to the liftgate harness.
4. Connect the hose to the liftgate inner panel.
5. Install the liftgate trim panel.