Lower Control Arm Bushings Replacement

Lower Control Arm Bushings Replacement

- Tools Required
- J 9519-E Lower Ball Joint Remover and Installer
- J 36618 Lower Control Arm Bushing Service Set

Removal Procedure

1. Remove the lower control arm. Refer to Lower Control Arm Replacement.
2. Remove the front bushing.
2.1. Unbend the crimps using a punch.
2.2. Remove the bushing using the J 36618-2, the J 9519-23, the J 36618-4, and the J 36618-1.
3. Remove the rear bushing (no crimp). Remove the bushing using the J 36618-5, the J 36618-3, the J 36618-2, and the J 9519-23.

Installation Procedure
1. Install the front bushing using the J 36618 and the J 9519-23. After installing the bushing, crimp the bushing into place.
2. Install the rear bushing using the J 36618 and the J 9519-23.
3. Install the lower control arm. Refer to Lower Control Arm Replacement.