Installation Procedure

Important: For correct installation of the stabilizer shaft, align the paint match marks (3) on the stabilizer shaft with the stabilizer shaft insulators (2).





1. Install the stabilizer shaft insulator (2) to the stabilizer shaft.

Notice: Refer to Fastener Notice in Cautions and Notices.

Important: Verify the vehicle's weight is on the tires and wheels. Verify the stabilizer shaft (5) is centered, side-to-side, and the insulators are aligned with the match marks on the stabilizer shaft. Verify the stabilizer shaft links (9) are set at a neutral position, as seen from above.





2. Install the stabilizer shaft insulator bracket (6) to the stabilizer shaft (5). Secure with 2 bolts (7).
^ Tighten the stabilizer shaft insulator bracket bolts (7) to 23 Nm (17 ft. lbs.).