Side Marker Lamp Replacement

REMOVAL PROCEDURE
1. Make sure the headlamp switch is in the OFF position.
2. Remove the lamp assembly screws (4).
3. Remove the bolt(6) securing the lamp assembly.
4. Remove the lamp assembly (3) from the tender.
5. Disconnect the electrical connector and bulb (5) from the lamp.
6. Remove the bulb from the socket.

INSTALLATION PROCEDURE
1. Install the bulb (5) to the socket.
2. Connect the electrical connector and bulb to the lamp (3).
3. Install the lamp assembly to the fender.
4. Install the bolt(6) securing the lamp assembly.
5. Install the lamp assembly screws (4).