Auxiliary Video Module (Outputs)

^ Circuit 8 (connector C3, terminal C): Variable voltage input from the IM when the headlamp switch is in the PARK or HEAD position. Provides voltage for control illumination at night.
^ Circuit 40 (connector C2, terminal D): High when the VES is energized. Provides voltage to the video screen position switch.
^ Circuit 40 (connector C2, terminal E): High when the VES relay is energized. Provides B+ when the video screen is in the down (viewing) position.
^ Circuit 40 (connector C3, terminal A): High with VES relay enabled. Provides voltage for IM operation.
^ Circuit 46 (connector C4, terminal B): Right channel video audio (+) output to the rear speakers via the IM. The Interface Module (IM) connects this output to the rear speakers when the radio and the Rear Seat Audio (RSA) are off. The IM does not send this output to the rear speakers when either radio or the RSA is on.
^ Circuit 46 (connector C4, terminal E): Right channel video audio (+) output to the Second Seat Audio (SSA) and Third Seat Audio (TSA) controls (bussed through the IM).
^ Circuit 115 (connector C4, terminal A): Right channel video audio (-) output to the rear speakers via the IM. The Interface Module (IM) connects this output to the rear speakers when the radio and the Rear Seat Audio (RSA) are off. The IM does not send this output to the rear speakers when either radio or the RSA is on.
^ Circuit 116 (connector C4, terminal C): Left channel video audio (-) output to the rear speakers via the IM. The Interface Module (IM) connects this output to the rear speakers when the radio and the Rear Seat Audio (RSA) are off. The IM does not send this output to the rear speakers when either radio or the RSA is on.
^ Circuits 115/116 (connector C4, terminal F): Rear channel video audio (-) output to the Second Seat Audio (SSA) and Third Seat Audio (TSA) controls (bussed through the IM).
^ Circuit 145 (connector C3, terminal D): High with radio on. When high, the IM mutes the rear speakers when the Rear Seat Audio (RSA) control is on.
^ Circuit 150 (connector C2, terminal B): Provides ground to the video screen for its operation.
^ Circuit 150 (connector C3, terminal B): Provides ground for IM operation.
^ Circuit 199 (connector C4, terminal 0): Left channel video audio (+) output to the rear speakers via the IM. The Interface Module (IM) connects this output to the rear speakers when the radio and the Rear Seat Audio (RSA) are off. The IM does not send this output to the rear speakers when either radio or the RSA is on.
^ Circuit 199 (connector C4, terminal G): Left channel video audio (+) output to the Second Seat Audio (SSA) and Third Seat Audio (TSA) controls (bussed through the IM).
^ BRN wire (connector C2, terminal A): Video signal (-) to the video screen.
^ GRY wire (connector C2, terminal F): Video signal (+) to the video screen.