4-Door

REMOVAL PROCEDURE
1. Open the rear door.
2. Remove the 2 clips which secure the center high-mounted stoplamp housing.
3. Remove the high-mounted stoplamp housing from the lamp.
4. Remove the 2 screws which secure the lamp screws.
5. Disconnect the lamp electrical connector.
6. Remove the lamp from the rear door.

INSTALLATION PROCEDURE
1. Install the lamp to the rear door. Secure the lamp with the 2 screws.
2. Connect the lamp electrical connectors.
3. Install the housing to the lamp. Secure the housing with the 2 clips.
4. Close the rear door.
5. Connect the negative battery cable.