2-Door

REMOVAL PROCEDURE
1. Remove the spare tire from the bracket.
2. Disconnect the high-mounted stoplamp electrical connector.
3. Remove the 3 bolts which secure the lamp.
4. Remove the lamp from the rear door.

INSTALLATION PROCEDURE

NOTICE: Refer to Fastener Notice in Cautions and Notices.

1. Install the lamp to the rear door. Secure the lamp with the 3 bolts.

Tighten
Tighten the high-mounted stoplamp bolts to 10 N.m (89 lb in).

2. Connect the lamp electrical connector.
3. Install the spare tire to the bracket.