Primary A/C System

Blower Motor Relay/Resistor:

Remove or Disconnect

1. Negative battery cable.
2. Roll instrument panel back.
3. Plenum tray.
4. Electrical connectors, as necessary.
5. Screws (73).
6. Blower motor resistor (74).

Install or Connect

1. Blower motor resistor (74).
2. Screws (73).

Tighten
- Screws (73) to 1.4 N.m (12 lb in).

3. Electrical connectors, as necessary.
4. Plenum tray.
5. Roll instrument panel forward.
6. Negative battery cable.
- Check circuit operation.