Auxiliary Heating System

Auxiliary Blower Motor Fan And Resistor:

Remove or Disconnect

1. Negative battery cable.
2. Right rear quarter trim panel.
3. Electrical connectors, as necessary.
4. Screws.
5. Blower motor resistor.

Install or Connect

1. Blower motor resistor.
2. Screws.

Tighten
- Screws to 1.4 N.m (12 lb in).

3. Electrical connectors, as necessary.
4. Right rear quarter trim panel.
5. Negative battery cable.
6. Check circuit operation.