Installation Procedure

Description:

1. Install the guide adjuster bracket to the pillar.
2. Install the two guide adjuster bracket retaining bolts to the pillar.
Tighten
Tighten the bolts to 20 N.m (15 lb. ft).

NOTICE: Refer to Fastener Notice in Service Precautions.

3. Snap the cover to the guide adjuster bracket into place.
4. Install the front side door lock pillar garnish molding. Refer to Front Side Door Lock Pillar Garnish Molding Replacement in Interior Trim.
5. Install the shoulder belt retaining bolt to the guide adjuster bracket.
Tighten
Tighten the bolt until the bolt is fully driven and seated. Do not strip the bolt.
6. Install the cover over the shoulder belt.