Curiosii for ever!: Car repair manuals for everyone.
Home >> Chevy Truck >> 1997 >> K Tahoe 4WD V8-5.7L VIN R >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Starter Motor >> Service and Repair >> Cleaning, Inspection, and Repair >> Repair Procedures >> Drive End Housing Bushing

Drive End Housing Bushing

If necessary, replace the bushing (37) in the drive housing (39).

28-MT Components:




Remove or Disconnect
1. Plug (40), if present, from inside the drive housing (39) by driving it out. Use a file to clean away remnants of the old stake to allow installation of a new plug. Clean away any metal shavings.
2. Bushing (37) by pressing it out using a suitable tool.

Install or Connect
1. New bushing into the drive housing (39) by pressing it in using a suitable tool.
- Press the bushing in until it is flush with the inside of the housing.
2. New plug (40), if used, to drive housing.
- Stake the housing material over the plug at three places, equally spaced.
pro multis · Curiosii