Install or Connect

Figure 16:

Figure 15:

CAUTION: When you are carrying an undeployed Inflator module:
^ Do not carry the Inflator module by the wires or connector on the Inflator module.
^ Make sure the bag opening points away from you.

When you are storing an undeployed inflator module, make sure the bag opening points away from the surface on which the inflator module rests. When you are storing a steering column, do not rest the column with the bag opening facing down and the column vertical. Provide free space for the air bag to expand in case of an accidental deployment. Otherwise, personal injury may result.

Install or Connect
1. Inflatable restraint I/P module (I/P trim cover if equipped with RPO ZX1) to the I/P carrier.
2. Fasteners to the inflatable restraint I/P module (I/P trim cover if equipped with RPO ZX1).

Tighten
^ Fasteners to 10 Nm (89 lb in).
3. Electrical connector and the Connector Position Assurance (CPA).
4. Passenger knee bolster.
^ Enable the SIR system. Refer to Air Bag(s) Arming and Disarming.

Tighten
^ Fasteners to 10 Nm (89 lb in).