Windshield Washer Pump: Service and Repair

REMOVE OR DISCONNECT
1. Negative battery cable.
2. Storage compartment and storage compartment tray.
3. Two bolts.
4. Hoses from front and rear washer pump hose connectors.
5. Vehicle harness connector from washer solvent container harness connector.
6. Washer solvent container from vehicle.
7. Cover from washer solvent container.
8. Two hoses and two connectors from pumps and container.
9. Two pumps and seals from container.
10. Filler neck and two seals from container.
11. Mounting grommet from container.

INSTALL OR CONNECT
1. Three isolators to washer solvent container.
2. Mounting grommet to container.
3. Filler neck and vent seals on container.
4. Filler neck on container.
^ Lubricate filler neck with washer solvent to ease installation.
5. Two pump seals in container.

IMPORTANT
^ Front and rear washer pumps are not interchangeable. Rear washer pump has larger harness connector opening.
6. Front and rear washer pumps on container.
^ Lubricate pump with washer solvent to ease installation.
7. Hoses and harness connectors to washer pumps.
^ Push harness wrap and hoses into the channels of the container.
8. Cover on container.
9. Container on vehicle with two bolts.
Tighten
^ Bolts to 6 Nm (53 Lbs. in.).
10. Vehicle harness connector to washer solvent container harness connector.

IMPORTANT
^ Washer pump hose connectors are color coded:
^ REAR-GRAY
^ FRONT-BLACK
11. Hoses to front and rear washer pump hose connectors.
12. Storage compartment tray and storage compartment.
13. Negative battery cable. Refer to SECTION 6D1.