Servicing Information

SERVICING INFORMATION
^ Replace all components included in the repair kits.
^ Lubricate the parts as specified.
^ Do not use lubricated shop air on brake parts. Rubber component damage may result.
^ After any hydraulic component has been removed or disconnected, if necessary, bleed all or part of the brake system.
^ Replace shoes and linings in axle sets only.
^ The torques specified are for dry, unlubricated fasteners.
^ Perform service operations on a clean bench free from mineral oil and any other contaminants.
^ Use extreme care when doing any work around the antilock components to prevent damage or misalignment.
^ Before moving the vehicle after a repair, pump the brake pedal several times to make sure it is firm. Do not move the vehicle until a firm pedal has been obtained. Check the brake fluid level in the master cylinder after pumping the brakes.