Rear Wiper Motor

Description:

Remove or Disconnect
1. Negative battery cable.
2. Liftgate garnish molding.
3. Wiper motor electrical connector.
4. Wiper arm assembly from the wiper motor.
5. Nut, spacer, and seal.
6. Two bolts and wiper motor assembly from the liftgate.

Install or Connect

NOTICE: Refer to Service Precautions.

1. Wiper motor assembly to the liftgate with two bolts.

Tighten
^ Bolts to 7 N.m (62 Lb.in.).

2. Seal, spacer and nut.

Tighten
^ Nut to 6 N.m (53 Lb.in.).

3. Wiper arm and blade assembly.
4. Wiper motor electrical connector.
5. Liftgate garnish molding.
6. Negative battery cable.