Door Courtesy Lamp/Reflector Replacement

Remove or Disconnect
1. Negative battery cable. Refer to Service Precautions.
2. Lens assembly from door panel.
^ Gently push the assembly toward the leading edge of the door.
^ Using a mechanical aid, lift the trailing end of the assembly from the door.
^ Pivot the lens from the door panel to clear the retaining tab at the leading edge.
3. Bulb from lens assembly (if equipped).
4. Assembly from vehicle.
5. Bulb from socket (if required for service).

Install or Connect
1. Bulb to the socket (if required for service).
2. Assembly to vehicle.
3. Bulb to lens assembly (if equipped).
4. Lens to the door panel.
^ Insert the tab on the lens into the slot in the door panel at its leading edge.
^ Pivot the lens into the door panel.
^ Press the lens assembly at the trailing edge until the lens snaps into the door panel.
5. Negative battery cable.