Compartment Lamp

Remove or Disconnect
1. Negative battery cable. Refer to Service Precautions.
2. Instrument panel extension screws and nuts.
^ Pull the panel forward from inside the vehicle.
3. Electrical connectors at the back of the panel.
4. Pull the bulb out from the switch at the back of the panel.
5. Switch.
A. Press in the clips on the sides of the switch.
B. Push the switch forward and out the front of the instrument panel extension.

Install or Connect
1. Bulb into the compartment switch.
2. Switch through the front of the panel by pressing in the clips at the sides of the switch.
3. Electrical connectors at the back of the panel.
4. Instrument panel extension with screws and nuts.
5. Negative battery cable.