With A/C

REFER TO TECHNICAL SERVICE BULLETIN NO.: 56-12-05 BEFORE ATTEMPTING THIS PROCEDURE

Blower Motor Resistor:

REMOVE OR DISCONNECT


1. Negative battery cable.

2. Electrical connectors.

3. Screws.

4. Blower motor resistor.


INSTALL OR CONNECT


1. Blower motor resistor.

NOTICE: Refer to "Fasteners" under "Vehicle Damage Warnings."


2. Screws.

- Tighten screws to 1.9 Nm (17 lbs. in.).


3. Electrical connectors.

4. Negative battery cable.

- Check circuit operation.