Engine Mount Replacement

Engine Mount Replacement

Removal Procedure




1. Remove the tire and wheel.
2. Remove the engine splash shield.
3. Remove the engine mount to frame nuts.




4. Place an adjustable jack and a block of wood under the oil pan.
5. Remove the engine mount bracket bolts.
6. Using the adjustable jack and block of wood, raise the engine until the engine mount/bracket can be removed.
7. Remove the engine mount/bracket from the vehicle.

Installation Procedure




1. Position the engine mount/bracket to the engine.
2. Install the engine mount bracket bolts.

Notice: Refer to Fastener Notice.

3. Tighten the engine mount bracket bolts.

Tighten the bolts in the sequence shown to 50 N.m (37 lb ft).




4. Lower the engine using the adjustable jack until the engine mount rests on the frame.
5. Remove the adjustable jack and block of wood from under the vehicle.
6. Install the engine mount to frame nuts.

Tighten the nuts to 50 N.m (37 lb ft).

7. Install the engine splash shield.
8. Install the tire and wheel.