Driveline Tunnel Closeout Panel Replacement

Driveline Tunnel Closeout Panel Replacement

Removal Procedure




1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the catalytic converters.
3. Remove the driveline tunnel closeout panel bolts.
4. Remove the closeout panel.

Installation Procedure




1. Install the driveline tunnel closeout panel into position.
2. Install the bolt into the closeout panel locating hole (1).
3. Install the bolt into the closeout panel slotted hole (2)

Notice: Refer to Fastener Notice.

Important: ALL of the driveline tunnel closeout panel bolts must be installed and torqued to specifications, the closeout panel functions as a part of the vehicle body structure.

4. Install the remaining bolts.

Tighten the driveline tunnel closeout panel bolts to 10 N.m (89 lb in).

5. Install the catalytic converters.
6. Lower the vehicle.