Power Steering Pump Pulley Replacement

Power Steering Pulley Replacement

Tools Required
* J 25033-C Power Steering Pump Pulley Installer
* J 25034-C Power Steering Pump Pulley Remover

Removal Procedure




1. Remove the brake pressure modulator valve (BPMV).
2. Remove the brake pressure modulator valve (BPMV) bracket.
3. Remove the accessory drive belt.
4. Install the J 25034-C on the power steering pump pulley and remove the pulley.

Installation Procedure




1. Using J 25033-C, install the power steering pump pulley onto the power steering pump.

Important: The pulley must be installed onto pump shaft so that the pulley hub is flush with the pump shaft.

2. Install the accessory drive belt.
3. Install the brake pressure modulator valve (BPMV) bracket.
4. Install the brake pressure modulator valve (BPMV).