Rear (Sedan)

SEAT BELT RETRACTOR REPLACEMENT - REAR (SEDAN)

REMOVAL PROCEDURE
1. Remove the rear seat cushion.
2. Remove the rear window trim panel.




3. Remove the rear seat belt anchor.
4. Remove the retractor fastener.
5. Remove the retractor from the vehicle.

INSTALLATION PROCEDURE




1. Install the seat belt retractor to the vehicle.
2. Install the fastener to the seat belt retractor.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the fastener to 35 N.m (25 lb ft).

3. Install the seat belt anchor.

Tighten the fastener to 35 N.m (25 lb ft).

4. Install the rear window trim panel.
5. Install the rear seat cushion.