Power Door Lock Reciever Replacement
The content of this article reflects the changes identified in TSB 05_08_52_004Bulletin No.05-08-52-004
Date: December 14, 2005
SERVICE MANUAL UPDATE
Subject:
Revised Remote Control Door Lock Receiver Replacement (Sedan)
Models:
2005-2006
Chevrolet Malibu (Sedan)
NOTE: When replacing a remote control door lock receiver, it is not necessary to remove the rear window shelf panel. Access the receiver through the opening in the rear window (sheet metal) panel.
Remote Control Door Lock Receiver Replacement (Sedan)
Removal Procedure
1. Open the rear compartment lid.
2. Working through the access hole, disconnect the electrical connectors from the receiver.
3. Working through the access hole, remove the receiver from the vehicle.
Installation Procedure
1. Install the receiver to the vehicle.
2. Connect the electrical connectors to the receiver.
3. The transmitter will need to be programmed after replacement.