Right Front (Coupe)

SEAT BELT RETRACTOR REPLACEMENT - RIGHT FRONT (COUPE)

REMOVAL PROCEDURE
1. Remove the Passenger seat.
2. Remove the Rear Trim Panel.




3. Remove the bolt attaching the retractor.
4. Remove the retractor assembly from the vehicle.

INSTALLATION PROCEDURE
1. Position the retractor assembly in the vehicle.




2. Install the retractor bolt.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolt to 41 N.m (31 lb ft).

3. Install the Rear Trim Panel.
4. Install the passenger seat.