Head Up Display Replacement

HEAD UP DISPLAY REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the negative battery cable.
2. Remove the instrument panel (I/P) assembly.




3. Remove the retaining screw that secures the head up display (HUD) to the steering column bracket.
4. Remove the HUD retaining nuts.
5. Remove the HUD from the vehicle.

INSTALLATION PROCEDURE




1. Transfer the retaining screw and nut to the replacement HUD.
2. Install the HUD to the vehicle:
1. Install the HUD onto the dash panel mounting studs.
2. Slide the HUD retaining screw into the slot on the steering column bracket.
3. Install the HUD retaining nuts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the nuts to 5 N.m (44 lb in).

4. Tighten the screw that retains the HUD to the steering column bracket.

Tighten the screw to 3 N.m (27 lb in).

5. Install the I/P assembly.
6. Connect the negative battery cable.