Rear

Wheel Speed Sensor Replacement - Rear

Removal Procedure





Caution
Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable.

Notice
Refer to Vehicle Lifting and Jacking Notice in Service Precautions.

2. Raise and suitably support the vehicle.
3. Disconnect the electrical connector for the rear wheel speed sensor from the rear axle.
4. Remove the mounting bolt from the rear wheel speed sensor.
5. Remove the cable grommets from the rear wheel speed sensor, and remove the speed sensor.

Installation Procedure





1. Install the rear wheel speed sensor, and install the cable grommets.

Notice
Refer to Fastener Notice in Service Precautions.

2. Install the rear wheel sensor mounting bolt.
Tighten the bolt to 9 Nm (7 ft. lbs.).
3. Connect the electrical connector for the rear wheel speed sensor to the rear axle.
4. Lower the vehicle.
5. Connect the negative battery cable.