Automatic Transmission Mount Bracket Replacement
Automatic Transmission Mount Bracket ReplacementRemoval Procedure
1. Raise and support the vehicle.
2. Remove the left front tire and wheel assembly.
3. Remove the left engine splash shield.
4. Support the transaxle
5. Remove the transaxle bracket to transaxle mount upper nuts.
6. Remove the bolts which secure the transaxle bracket to the transaxle.
7. Remove the transaxle bracket.
Installation Procedure
1. Position the transaxle bracket to the transaxle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the transaxle bracket bolts.
Tighten the bracket bolts to 95 Nm (70 ft. lbs.).
3. Remove the support from the transaxle.
4. Install the upper nuts which secure the transaxle bracket to the transaxle mount.
Tighten the upper nuts to 47 Nm (35 ft. lbs.).
5. Install the left engine splash shield.
6. Install the left front tire and wheel.
7. Lower the vehicle.