Exhaust Gas Recirculation (EGR) Pipe Replacement
EXHAUST GAS RECIRCULATION (EGR) PIPE REPLACEMENTREMOVAL PROCEDURE
1. Remove the exhaust gas recirculation (EGR) pipe bolt and carefully pull the pipe assembly back.
2. Remove the EGR pipe assembly bolts from the exhaust manifold.
3. Remove the EGR pipe.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the EGR pipe to the exhaust manifold.
Tighten
Tighten the EGR pipe bolts to 25 N.m (18 lb ft).
2. Install the EGR pipe to the EGR valve.
3. Install the EGR pipe bolt.
Tighten
Tighten the bolt to 30 N.m (22 lb ft).