Rear

Stabilizer Shaft Link Replacement

Removal Procedure





1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assemblies.
3. Remove the stabilizer shaft link nuts from the lower control arms.
4. Remove the stabilizer shaft link nuts and links from the shaft.

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.





1. Install the stabilizer shaft links and link nuts to the stabilizer shaft and to the lower crossmember.
^ Tighten the stabilizer shaft link nuts to 72 Nm (53 ft. lbs.).
2. Install the tire and wheel assemblies.
3. Lower the vehicle.