Remote Power Steering Fluid Reservoir Replacement
Remote Power Steering Fluid Reservoir ReplacementRemoval Procedure
1. Place a drain pan under the vehicle.
2. Remove the cap stick (1) from the power steering fluid reservoir (2).
3. Remove the power steering fluid reservoir (2) from the power steering fluid reservoir bracket (5).
4. Remove the following components from the power steering fluid reservoir (2):
- The power steering reservoir outlet pipe/hose.
- The power steering return hose.
5. Remove the power steering fluid reservoir (2) from the vehicle.
Installation Procedure
1. Install the power steering fluid reservoir (2) to the vehicle.
Important: Make sure that the alignment mark on the power steering return hose is installed at the bottom of the power steering reservoir.
2. Install the following components to the power steering fluid reservoir (2):
- The power steering reservoir outlet pipe/hose.
- The power steering return hose.
3. Install the power steering fluid reservoir (2) to the power steering fluid reservoir bracket (5).
4. Bleed the power steering system.