Hood Shock / Support: Service and Repair

Assist Rod Replacement - Hood

Removal Procedure






Caution: Refer to Hood Hold Open Device Caution in Service Precautions.

1. Open and support the hood.
2. Lift up the retainer clips on the assist rod using a small flat bladed tool

Notice: Refer to Liftgate/Hood Assist Rod Notice in Service Precautions.

3. Pull the upper end of the assist rod from the ball joint on the hood.
4. Pull the lower end of the assist rod from the ball joint on the lower hood hinge.

Installation Procedure




1. Press the upper end of the assist rods on to the ball joint on the hood.
2. Press the lower end of the assist rod on to the ball joint on the lower hood hinge.
3. Remove the support from the hood.
4. Close the hood.