Knee Bolster Bracket Replacement - Passenger

Bracket Replacement - Knee Bolster (Passenger)

Removal Procedure




1. Remove the console.
2. Remove the IP accessory trim plate.
3. Remove the driver knee bolster trim panel.
4. Remove the IP passenger compartment.
5. Remove the IP upper trim pad.

Important: The following step must be performed to assure proper trim fits during installation.

6. Mark the location of the passenger knee bolster bracket. Refer to Instrument Panel (I/P) Disassembly Precautions.
7. Remove the bolts retaining the passenger knee bolster bracket to the IP center support bracket.




8. Remove the bolts retaining the passenger knee bolster bracket to the passenger SIR bracket.
9. Remove the passenger knee bolster bracket.

Installation Procedure




1. Install the passenger knee bolster bracket as marked prior to removal.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the passenger knee bolster bracket to passenger SIR bracket retaining bolts.

Tighten the passenger knee bolster bracket retaining bolts to 12 N.m (106 lb in).




3. Install the passenger knee bolster bracket to IP center support bracket retaining bolts.

Tighten the passenger knee bolster bracket retaining bolts to 12 N.m (106 lb in).

4. Install the IP upper trim pad.
5. Install the IP passenger compartment.
6. Install the driver knee bolster trim panel.
7. Install the IP accessory trim plate.
8. Install the console.