Power Steering Pump Drive Belt Replacement

Power Steering Pump Drive Belt Replacement

^ Tools Required
- J 23600-B Belt Tension Gage

Checking Belt Tension

1. Notice: Refer to Belt Dressing Notice in Service Precautions.

Using the J 23600-B , check the tension on the pump drive belt.
2. If the J 23600-B does not indicate the proper tension, adjust the belt.

Adjusting Belt Tension
1. With the J 23600-B on the pump drive belt, loosen the alternator adjusting bolt and move the alternator until the gage indicates the proper tension.

2. Notice: Refer to Fastener Notice in Service Precautions.

Tighten the alternator adjusting bolt.
Tighten the alternator adjusting bolt to 20 Nm (15 ft. lbs.).