Hatchback

HIGH MOUNTED STOP LAMP REPLACEMENT (HATCHBACK)

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
Battery Disconnect Caution







1. Disconnect the negative battery cable.
2. Open the hatchback door.
3. Pry open the center high-mounted stop lamp (CHMSL) access cover with a screwdriver.
4. Disconnect the electrical connector.
5. Remove the screws and the CHMSL.



INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.
Fastener Notice







1. Install the CHMSL with the screws.

Tighten
Tighten the CHMSL mounting screws to 3 N.m (27 lb in).

2. Connect the electrical connector.
3. Close the CHMSL access cover.
4. Connect the negative battery cable.